Print
Apertur
30 mm
Winkelgeber Galvanometer­scanner
digital encoder
Show Optik
Wellenlängen­bereiche
(Standard)
1060 - 1085 nm
Max. Laserleistung
(Standardsysteme, 100% Betrieb)
2000 W @ 1060 - 1085 nm
Typischer Auslenkwinkel
±0.37 rad (optical)
Show Dynamik
Anzahl installierter Tunings
1
Typisches Tuning
SCANahead
Schleppverzug
0 ms
Genauigkeit
Wiederhol­genauigkeit
(RMS)
< 0.4 µrad
Positions­auflösung
(max.)*
20 bit *
Nichtlinearität
< 0.5 mrad / 44°
Temperaturdrift
Offset
< 10 µrad/K
Gain
< 5 ppm/K
24-Std.-Drift
(nach 3 Std.)
Offset
< 20 µrad
Gain
< 25 ppm
* 20 bit: based on the full angle range (e.g. positioning resolution 0.7 µrad for angle range ±0.36 rad),
resolutions better than 16 bit (11 µrad) only together with SL2-100 interface
Elektrik / Ansteuerung
Regelung Galvanometer­scanner
digital servo control board
Ansteuer­schnittstelle
(Alternativen)
digital SL2-100
Erweiterte Diagnosemöglichkeiten
yes (iDRIVE)
Versorgungs­spannung
48 V DC, max. 5 A
Mechanik
Scan-Achsen
2-axis system
Gehäuse­varianten
scan head
Stecker­positionen
opposite to beam exit side
Gewicht ohne Objektiv
(Standardgehäuse)
approx. 9 kg
Größe (L x B x H)
(Standardgehäuse)
(230 x 140 x 230) mm3
Strahlversatz
35.54 mm
Sonstige Ausstattung
Wasserkühlung
yes
Luftkühlung
yes (compressed air cooling of mirrors)
Sonstige Spezifikationen
Arbeits­temperatur
25 °C ± 10 °C
Abweichung des Auslenkwinkels
< 5 mrad
Abweichung von der Nullposition
< 5 mrad
Erweiterungen
Combinable with varioSCAN II or excelliSHIFT for 3D applications,
control with SCANLAB´s RTC6 board,
camera adapter available
Typische Anwendungen
Additive manufacturing
Produktvergleich